Limb lengthening is a reconstructive procedure where the deformed bone is straightened or missing bone is replaced. It is performed in children and adults who have variations in their leg length as a result of diseases, injuries or birth defects. Limb lengthening procedure can be performed by minimally invasive techniques and may require a hospitalization of 1-2 nights.
Children born with congenital defects such as fibular hemimelia (absence of fibula bone), congenital short femur and hemiatrophy (absence of one side of body part) have unequal leg lengths which can be treated with a limb lengthening procedure. Other conditions which can be corrected by limb lengthening procedure include
The process of increasing the bone length depends on tissue and bone regeneration. When the bone is pulled apart, it tends to regenerate at the rate of approximately 1 mm per day. There are two phases of lengthening until the bone is healed: distraction phase and consolidation phase.
The distraction phase involves lengthening of the bone. Consolidation phase involves hardening and calcification of this new bone which is still weak due to lack of calcium.
There are two types of devices available such as external fixators and internal fixators. The external devices are attached to the bone with wires or threaded pins. The internal devices are placed inside the body, on the bone or inside the bone marrow.
The procedure involves:
During surgery, a small incision is made to gain access to the part of the bone to be cut. A hospital stay of 1-3 days may be required after which rehabilitation and application of splints will be done.
Bone lengthening begins a few days or weeks after the surgery. With the use of external fixators, the patient or family member performs small twists or by applying pressure on the leg. When the bones are pulled apart new bone gradually starts to grow between the bone ends. The rate of growth is usually 1 mm per day. X-rays are obtained every 2 to 3 weeks to check for new bone growth, nerve and muscle function, and also to avoid any further complications.
After achieving the required length, all adjustments made to the device is stopped. The newly formed bone is weak and will tend to break without the support of external or internal devices. Lengthening over nails (LON) is used as an external device. This device remains in the bone until distraction phase. After removal of LON, an internal rod is placed at the end of the bone for support. The rod hardens the newly formed bone. The function of the internal device automatically stops after reaching a desired length. Bone healing is evaluated with X-rays that are obtained once a month. The X-ray shows the amount of calcium present in the bone. After the bone is healed the rods are removed.
Removal of the External Fixator
The removal of the external fixator device is done either under general anesthesia or with the patient is awake. After removal, a cast made of plaster of Paris (POP) is placed for a month for protection. No cast is placed for patients with an internal fixator device as the support placed internally protects the bone.